Wireless NES Controller

therealdanielj/ February 20, 2016/ Gaming Mods/ 0 comments

About a year ago I made a mod on one of my NES Controllers, I make it into a wireless USB controller.

For this project, I used the chip from an old wireless USB keyboard, an old Gameboy Advanced SP battery, and obviously a NES controller.

This mod was a “quick” and fun one, the hardest part was figuring out what combination of pins to use for different key inputs. I spent about an hour or so figuring out which combination it was for the UP key, after this, I realized that I could just set it in software on the computer, instead of spending another 7 hours (one per button) figuring out the rest.

The way it works is simple, I took this chip from a keyboard, and all that the keys on a keyboard are, are buttons with connections to this chip in different patterns to differentiate one key from another. So what I did, is I took the traces from the NES controller, and wired them to the board as if they were keys.

One thing you might notice, is that there is no way to charge the unit, I did that on purpose, the reason I felt that it was not necessary right now to add a charging adapter, is that before I had made this mod, the keyboard was turned on for about 2 years without changing the AAA batteries, and they were still running fairly strong. I later added a power switch to the unit to conserve power when not in use. I decided to use it without a charging adapter, and if needed later on, add one, or remove the battery and charge it. It still has not gone dead, and this was built a year ago.

Here is a video of it working.

Leave a Comment